How to choose the best CPU cooler for you?

Choosing the correct CPU cooler is one of the most critical decisions you’ll make while designing your PC. The CPU in your computer is one of the most critical parts of the system. It’s also critical to make sure your CPU is running at the right temperature. Furthermore, there are a lot of different websites from where you can get help in deciding which cpu cooler to purchase, you can check out CPU cooler reviews from different websites such as perfect tech reviews.

If you buy the right CPU cooler, your computer will run at the proper temperature, increasing the life of your processor. If you don’t, overheating your CPU might lead to the need for a new CPU or, in the worst-case scenario, a new motherboard. Nevertheless, here are some of the best things that you will need to consider when choosing a CPU cooler for you.

IHS

An IHS, or integrated heat spreader, is the top silver cover region of a CPU. This flat copper plate protects the CPU core. Its goal is to get a heat transfer from the processor and then disperse that heat evenly over the CPU radiator. Depending on the manufacturer and model, the IHS can be bonded to the CPU with glue or soldered in place. Soldered IHS units retain better contact than non-solder IHS units. The decision to solder is entirely up to the manufacturer, and structural restrictions usually prevent it.

TIM

The thermal interface material, often known as TIM, is a relatively smooth component that connects the IHS to the heat base of the CPU cooler. The smoothness of this component will have an impact on the unit’s conductibility. Because manufacturers can never construct a really flush product, they combine conductive and non-conductive pastes to create an artificially flat surface.

Liquid cpu coolers

Water- or liquid-based CPU coolers are a step up from air coolers and are better at controlling the temperature of your processor. Two examples are the Rosewill RGB AIO 240mm CPU Liquid Cooler and the CORSAIR Hydro Series H100i RGB PLATINUM. Builders who do not have an overheating CPU or who do not use their PCs regularly should avoid liquid coolers. If a builder has a simple PC or low-end gaming system, a decent OEM air cooler or aftermarket air-based solution should suffice.

Air cpu coolers

Air coolers will help general-purpose PC users. Aftermarket air coolers are less expensive than OEM air coolers and can be used to replace them. The cooling units aggressively distribute hot air using specially constructed heat fins. These fins keep the temperature of the PC casing low. Air coolers aren’t little pieces of equipment. An aftermarket air cooler is rather large when compared to water cooling options. As a result, these radiators might not be compatible with all computer cases. Furthermore, an air cooler may not be sufficient if you are building a gaming PC or any system that will frequently work at higher temperatures.

Leave a Comment